Liquid Si - Standard MD

Overview >Liquid Si - Standard MD > Liquid Si - Freezing > Nucleophile Substitution CH3Cl - Standard MD > Nuclephile Substitution CH3Cl - mMD1 > Nuclephile Substitution CH3Cl - mMD2 > Nuclephile Substitution CH3Cl - mMD3 > Nuclephile Substitution CH3Cl - SG > Nuclephile Substitution CH3Cl - BM > List of tutorials

Task

Generating liquid Si by melting of the crystalline structure via molecular dynamics.

Input

POSCAR

• We start this example by making a POSCAR using the conventional unit cell with 8 atoms which should look like this:

Si cubic diamond conventional cell
  5.43100000000000
 1.00000000 0.00000000 0.00000000
 0.00000000 1.00000000 0.00000000
 0.00000000 0.00000000 1.00000000
  Si
  8
Direct
  0.00000000 0.00000000 0.00000000
  0.75000000 0.25000000 0.75000000
  0.00000000 0.50000000 0.50000000
  0.75000000 0.75000000 0.25000000
  0.50000000 0.00000000 0.50000000
  0.25000000 0.25000000 0.25000000
  0.50000000 0.50000000 0.00000000
  0.25000000 0.75000000 0.75000000

• We obtain a sufficiently large supercell (2x2x2 containing 64 atoms) by following the description in: Preparing a Super Cell.
• The new POSCAR file of the two 2x2x2 super cell of the conventional cell should look like this:

Si cubic diamond 2x2x2 super cell of conventional cell
     5.43090000000000
    2.00000000   0.00000000   0.00000000
    0.00000000   2.00000000   0.00000000
    0.00000000   0.00000000   2.00000000
   Si
   64
Direct
   0.00000000   0.00000000   0.00000000
   0.50000000   0.00000000   0.00000000
   0.00000000   0.50000000   0.00000000
   0.50000000   0.50000000   0.00000000
   0.00000000   0.00000000   0.50000000
   0.50000000   0.00000000   0.50000000
   0.00000000   0.50000000   0.50000000
   0.50000000   0.50000000   0.50000000
   0.37500000   0.12500000   0.37500000
   0.87500000   0.12500000   0.37500000
   0.37500000   0.62500000   0.37500000
   0.87500000   0.62500000   0.37500000
   0.37500000   0.12500000   0.87500000
   0.87500000   0.12500000   0.87500000
   0.37500000   0.62500000   0.87500000
   0.87500000   0.62500000   0.87500000
   0.00000000   0.25000000   0.25000000
   0.50000000   0.25000000   0.25000000
   0.00000000   0.75000000   0.25000000
   0.50000000   0.75000000   0.25000000
   0.00000000   0.25000000   0.75000000
   0.50000000   0.25000000   0.75000000
   0.00000000   0.75000000   0.75000000
   0.50000000   0.75000000   0.75000000
   0.37500000   0.37500000   0.12500000
   0.87500000   0.37500000   0.12500000
   0.37500000   0.87500000   0.12500000
   0.87500000   0.87500000   0.12500000
   0.37500000   0.37500000   0.62500000
   0.87500000   0.37500000   0.62500000
   0.37500000   0.87500000   0.62500000
   0.87500000   0.87500000   0.62500000
   0.25000000   0.00000000   0.25000000
   0.75000000   0.00000000   0.25000000
   0.25000000   0.50000000   0.25000000
   0.75000000   0.50000000   0.25000000
   0.25000000   0.00000000   0.75000000
   0.75000000   0.00000000   0.75000000 
   0.25000000   0.50000000   0.75000000
   0.75000000   0.50000000   0.75000000
   0.12500000   0.12500000   0.12500000
   0.62500000   0.12500000   0.12500000
   0.12500000   0.62500000   0.12500000
   0.62500000   0.62500000   0.12500000
   0.12500000   0.12500000   0.62500000
   0.62500000   0.12500000   0.62500000
   0.12500000   0.62500000   0.62500000
   0.62500000   0.62500000   0.62500000
   0.25000000   0.25000000   0.00000000
   0.75000000   0.25000000   0.00000000
   0.25000000   0.75000000   0.00000000
   0.75000000   0.75000000   0.00000000
   0.25000000   0.25000000   0.50000000
   0.75000000   0.25000000   0.50000000
   0.25000000   0.75000000   0.50000000
   0.75000000   0.75000000   0.50000000
   0.12500000   0.37500000   0.37500000
   0.62500000   0.37500000   0.37500000
   0.12500000   0.87500000   0.37500000
   0.62500000   0.87500000   0.37500000
   0.12500000   0.37500000   0.87500000
   0.62500000   0.37500000   0.87500000
   0.12500000   0.87500000   0.87500000
   0.62500000   0.87500000   0.87500000

KPOINTS

K-Points
 0
Gamma
 1  1  1
 0  0  0

• Since a sufficiently large super cell is used in this example, it is ok in this case to use only a single k-point in the calculations. Hence it is also possible to use the $\Gamma$-point only version which is significantly faster than the standard version.

INCAR

ISMEAR = 0
IBRION = 0
MDALGO = 2
ISIF = 2
SMASS = 1.0
SIGMA = 0.1
LREAL = Auto
ALGO = VeryFast
PREC = Low
ISYM = 0
TEBEG = 2000
NSW = 50
POTIM = 3.0
NCORE = 2

• To select a molecular dynamics calculation set IBRION=0.
• By selecting MDALGO=2 and ISIF=2 we select the NVT ensemble using the Nose-Hoover thermostat.
• The tag SMASS specifies the Nose mass, which is a ficitional mass for the fictional coordinate of the heat bath. The choice of SMASS=1.0 should work well for this tutorial.
• Since we are dealing with a super cell, we set LREAL=Auto. In this mode the projection operators are evaluated in real space. This should speed up the calculation while being slightly less accurate then the evaluation of the operators in reciprocal space.
• To significantly speed up the calculations we use ALGO=VeryFast and PREC=Low. This is perfectly ok for this tutorial example but for more precise results these flags should be used with caution.
• A time step of 3 femtoseconds (POTIM=3.0) is employed in this example, which should be ok for many applications of Si.
• The tag NCORE=2 specifies that the parallelization is done such that 2 cores share the work on one orbital. This means that for e.g. 8 cores 4 different orbitals would be treated simultaneously, where for each orbital two plane-wave coefficients would be calculated simultaneously.

Calculation

The calculation is started from the perfect crystal. Since the chosen temperature at 2000K is significantly above the known melting temperature at around 1400 K the melting should be achieved relatively quickly.

It is suggested to run this calculation using the $\Gamma$-point only version, since we have only one k point. Then it should be a very quick calculation on eight nodes:

mpirun -np 8 vasp_path/vasp_gam

When the solid melts the crystal structure and the distances between the atoms change. This can be well monitored by looking at the pair correlation function (or radial distribution function).

• First we run the calculation for 50 ps:

The pair correlation function is written out to the PCDAT file. The abscissa of that file is within mesh points of a selected grid and need to be converted to $\AA$. This is done by invoking the following short awk script on the command line:

awk <PCDAT >PCDAT.xy ' NR==8 {pcskal=$1} NR==9 {pcfein=$1} NR>=13 {line=line+1; print (line-0.5)*pcfein/pcskal,$1} '

Download

Overview >Liquid Si - Standard MD > Liquid Si - Freezing > Nucleophile Substitution CH3Cl - Standard MD > Nuclephile Substitution CH3Cl - mMD1 > Nuclephile Substitution CH3Cl - mMD2 > Nuclephile Substitution CH3Cl - mMD3 > Nuclephile Substitution CH3Cl - SG > Nuclephile Substitution CH3Cl - BM > List of tutorials